# Google_MQTT_Musca-S1_ESP8266_WiFi_FreeRTOS

**Repository Path**: mirrors_ARMmbed/Google_MQTT_Musca-S1_ESP8266_WiFi_FreeRTOS

## Basic Information

- **Project Name**: Google_MQTT_Musca-S1_ESP8266_WiFi_FreeRTOS
- **Description**: No description available
- **Primary Language**: Unknown
- **License**: Not specified
- **Default Branch**: master
- **Homepage**: None
- **GVP Project**: No

## Statistics

- **Stars**: 0
- **Forks**: 0
- **Created**: 2020-08-08
- **Last Updated**: 2025-09-20

## Categories & Tags

**Categories**: Uncategorized

**Tags**: None

## README

Google MQTT Demo
================

This demo application connects to 
[Google Cloud IoT](https://cloud.google.com/solutions/iot/) 
through MQTT and publishes messages.

It requires a registered [device](https://www2.keil.com/iot/google) in the Google Cloud IoT.

The following describes the various components and the configuration settings.

Once the application is configured you can:
 - Build the application
 - Connect the debugger
 - Run the application and view messages in a debug printf or terminal window


Google IoT Client
-----------------
The file `demo.c` configures the connection to Google IoT with these settings:
 - PROJECT_ID:   Project ID
 - CLOUD_REGION: Cloud region
 - REGISTRY_ID:  Registry ID
 - DEVICE_ID:    Device ID

Note: These settings need to be configured by the user!

The file `pkey.h` configures the device private key.

Note: The device private key needs to be provided by the user!


FreeRTOS Real-Time Operating System
-----------------------------------
The [FreeRTOS RTOS](https://github.com/ARM-software/CMSIS-FreeRTOS) 
implements the resource management. It is configured with the following settings:

- Global Dynamic Memory size: 24000 bytes
- Default Thread Stack size: 3072 bytes


WiFi IoT Socket
---------------
This implementation uses an IoT socket layer that connects to a 
[CMSIS-Driver WiFi](https://arm-software.github.io/CMSIS_5/Driver/html/index.html).

The file `socket_startup.c` configures the WiFi connection with these settings:
 - SSID:          network identifier
 - PASSWORD:      network password
 - SECURITY_TYPE: network security

Note: These settings need to be configured by the user!


ESP8266 WiFi Module
-------------------
The [ESP8266 WiFi Module](https://www2.keil.com/iot/shields/wrl13287) 
is connected via an Arduino connector using a USART interface.
It exposes a **CMSIS-Driver WiFi**.


Arm Musca-S1 Target Board
-------------------------
The Board layer contains the following configured interface drivers:

**CMSIS-Driver USART1** routed to Virtual COM port (DAPLink):
 - RX: UART1_RX
 - TX: UART1_TX

**CMSIS-Driver USART0** routed to Arduino UNO R3 connector (J15):
 - RX: D0 GPIO0 (PA0)
 - TX: D1 GPIO1 (PA7)

**STDOUT** routed to Virtual COM port (DAPLink, baudrate = 115200)