【ppc64le】oemaker命令-v版本号中带"."导致制作出的ISO镜像通过U盘安装卡住

openEuler-24.03-LTS/openEuler-22.03-LTS-SP4分支，在ppc64le架构下，通过对应oemaker命令：oemaker -t standard -p openEuler -v xxx -r v1 -s 工程源地址 制作ISO，
（1）当-v版本号中不带"."时，例如：oemaker -t standard -p openEuler -v 24-03 -r LTS -s https://eulermaker.compass-ci.openeuler.openatom.cn/api/ems3/repositories/openEuler-24.03-LTS-everything:ppc64le/openEuler%3A24.03-LTS/ppc64le/ ，此时做出的ISO通过PXE和U盘都能正常安装并启动；
（2）当-v版本号中带"."时，例如：oemaker -t standard -p openEuler -v 24.03 -r LTS -s https://eulermaker.compass-ci.openeuler.openatom.cn/api/ems3/repositories/openEuler-24.03-LTS-everything:ppc64le/openEuler%3A24.03-LTS/ppc64le/ ，此时做出的ISO通过PXE都能正常安装并启动，但通过U盘安装时启动会卡住，卡住具体位置如下：
[2024-07-04 17:00:19] [  OK  ] Finished Create Volatile Files and Directories.
[2024-07-04 17:00:19] [   16.595805] scsi 0:0:0:0: Direct-Access     Kingston DataTraveler 3.0 1100 PQ: 0 ANSI: 6
[2024-07-04 17:00:19] [   16.598395] sd 0:0:0:0: [sde] 60463659 512-byte logical blocks: (31.0 GB/28.8 GiB)
[2024-07-04 17:00:19] [   16.599442] sd 0:0:0:0: [sde] Write Protect is off
[2024-07-04 17:00:19] [   16.600459] sd 0:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[2024-07-04 17:00:19] [   16.609367]  sde: sde1
[2024-07-04 17:00:19] [   16.609612] sd 0:0:0:0: [sde] Attached SCSI removable disk
[2024-07-04 17:00:19] [   16.627595] sr 1:0:0:0: [sr0] scsi-1 drive
[2024-07-04 17:00:19] [   16.627635] cdrom: Uniform CD-ROM driver Revision: 3.20
[2024-07-04 17:00:19] [  OK  ] Finished Virtual Console Setup.
[2024-07-04 17:00:19] [  OK  ] Reached target System Initialization.
[2024-07-04 17:00:19] [  OK  ] Reached target Basic System.
[2024-07-04 17:00:19] [  152.771636] dracut-initqueue[1756]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[2024-07-04 17:00:19] [  152.772546] dracut-initqueue[1756]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[2024-07-04 17:00:19] [  152.773950] dracut-initqueue[1756]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[2024-07-04 17:00:19] [  152.775812] dracut-initqueue[1756]: Warning: dracut-initqueue: starting timeout scripts
[2024-07-04 17:00:19] [  152.775981] dracut-initqueue[1756]: Warning: ############# Anaconda installer errors begin #############
[2024-07-04 17:00:19] [  152.776095] dracut-initqueue[1756]: Warning: #                                                         #
[2024-07-04 17:00:19] [  152.776202] dracut-initqueue[1756]: Warning: It seems that the boot has failed. Possible causes include
[2024-07-04 17:00:19] [  152.776317] dracut-initqueue[1756]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[2024-07-04 17:00:19] [  152.776413] dracut-initqueue[1756]: Warning: kernel cmdline. Please verify that you have specified
[2024-07-04 17:00:19] [  152.776508] dracut-initqueue[1756]: Warning: inst.stage2 or inst.repo.
[2024-07-04 17:00:19] [  152.776601] dracut-initqueue[1756]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[2024-07-04 17:00:19] [  152.776697] dracut-initqueue[1756]: Warning: #                                                         #
[2024-07-04 17:00:19] [  152.776791] dracut-initqueue[1756]: Warning: ####     Installer errors encountered during boot:     ####
[2024-07-04 17:00:19] [  152.776902] dracut-initqueue[1756]: Warning: #                                                         #
[2024-07-04 17:00:19] [  152.777003] dracut-initqueue[1756]: /lib/dracut/hooks/initqueue/timeout/50-anaconda-error-reporting.sh: line 19: /run/anaconda/initrd_errors.txt: No such file or directory
[2024-07-04 17:00:19] [  152.777111] dracut-initqueue[1756]: Warning: #                                                         #
[2024-07-04 17:00:19] [  152.777235] dracut-initqueue[1756]: Warning: ############# Anaconda installer errors end ###############
![输入图片说明](https://foruda.gitee.com/images/1722305915034659289/078830b0_13740625.png "屏幕截图")

src-openEuler/oemaker

内容风险标识

评论 (3)

src-openEuler/oemaker .gitee-modal { width: 500px !important; }

内容风险标识