# socketcand

**Repository Path**: sun_xiaoxu/socketcand

## Basic Information

- **Project Name**: socketcand
- **Description**: Server to access CAN sockets over ASCII protocol
- **Primary Language**: Unknown
- **License**: Not specified
- **Default Branch**: master
- **Homepage**: None
- **GVP Project**: No

## Statistics

- **Stars**: 0
- **Forks**: 0
- **Created**: 2024-03-03
- **Last Updated**: 2024-03-06

## Categories & Tags

**Categories**: Uncategorized

**Tags**: None

## README

socketcand
==========

Socketcand is a daemon that provides access to CAN interfaces on a machine via a network interface. The communication protocol uses a TCP/IP connection and a specific protocol to transfer CAN frames and control commands. The protocol specification can be found in ./doc/protocol.md.

Installation
------------

To build and run socketcand make sure you have the following tools installed:

* autoconf
* make
* gcc or another C compiler
* a kernel that includes the SocketCAN modules
* the headers for your kernel version
* the libconfig with headers (libconfig-dev under debian based systems)

First run

    $ ./autogen.sh

to create the 'configure' script.

Then run the created script with

    $ ./configure

to check your system and create the Makefile. If you want to install scripts for a init system other than SysVinit check the available settings with './configure -h'.
To compile and install the socketcand run

    $ make
    $ make install

Service discovery
-----------------

The daemon uses a simple UDP beacon mechanism for service discovery. A beacon containing the service name, type and address is sent to the broadcast address (port 42000) at minimum every 3 seconds. A client only has to listen for messages of this type to detect all SocketCAN daemons in the local network.

Usage
-----

     socketcand [-v | --verbose] [-i interfaces | --interfaces interfaces]
		[-p port | --port port] [-l interface | --listen interface]
		[-u name | --afuxname name] [-n | --no-beacon] [-d | --daemon]
		[-h | --help]

### Description of the options
* **-v** (activates verbose output to STDOUT)
* **-i interfaces** (comma separated list of SocketCAN interfaces the daemon shall provide access to e.g. '-i can0,vcan1' - default: vcan0)
* **-p port** (changes the default port '29536' the daemon is listening at)
* **-l interface** (changes the default network interface the daemon will bind to - default: eth0)
* **-u name** (the AF_UNIX socket path - abstract name when leading '/' is missing) (N.B. the AF_UNIX binding will supersede the port/interface settings)
* **-n** (deactivates the discovery beacon)
* **-d** (set this flag if you want log to syslog instead of STDOUT)
* **-h** (prints this message)